Tag Archives: toile

Chapter One- We’re Getting Married!

Mr Thrifty proposed in July- we’re finally getting hitched. We’ve settled on a date of July 5th, 2014 and we’re having our wedding and reception at The Circulating Library in South Australia (hence the Chapter One title, get it?!).

Institute Building SLSA

I’ll be posting a few of the things we’ll be DIY-ing for the wedding, the most notable of course will be my wedding dress! OMG! Huge undertaking! Scary! Exciting! Challenging!

I went fabric browsing with my mum last week just to see what’s out there for bridal laces, fell in love with one of them which solidified the design I had in my head. I spent the week tweaking the sketches, making sure I knew how much of the luscious (read: expensive) lace I’d need then went back and bought a length of it this week.

Beaded Tulle Lace

Beaded Tulle Lace- Large Motif

With the design somewhat decided (there’s always room for minor changes as it comes together) I figured I should start my own “Wedding Dress Saga” post for you all to follow along. We’re getting married on July 5th, so there’s about 6 months worth of work for me to share.

The design is for a fit-and-flare silhouette, featuring large lace appliqués and a few draped panels across both front and back. There is a bustled “pouf” around the knee which sits above an a-line tulle skirt. The straps or sleeves will be decided as it nears completion but I would like the back neckline to end in a V at the top of the zip/button closure.

Wedding Dress Sketch

So far I’ve been playing around with a corset pattern in order to get a good shape for the body of the dress. I’ve chosen the Freedom Corset from Bra Makers Supply. Some of the reasons for using this pattern is that it comes in my size, it’s quite full coverage and it has two variations- an overbust and and underbust corset in one package. I ordered it via etsy and it arrived in about two weeks (Canada to Australia).

The first one I made up was too big. I didn’t take my waist reduction into account so the lacing panels were touching and I had very little to show in the way of compression or support.

Corset Toile One FSB

The next version I made up as an underbust but lengthened below the hip to contain more of the belly pooch but I realised I do want an overbust. I don’t want to wear a bra and worry about my shoulder straps (no photos, it went in the bin).

The last version I’ve made from blockout curtain lining at $4AUD per meter (£2ish) and I am finally starting to get somewhere. It’s two sizes smaller than the first and long enough to contain the belly. I’ve drawn a few lines on the toile to show where I’d change the lengths but overall, for a toile, I am very happy with it. Oh, please excuse the serious slanting! The fabric was cheap, most likely very badly off grain, and you should never lace a corset as tight as I did on the first try, oops!

Corset Toile Two FBS
Anyways! With the corset portion somewhat sorted I will be roping MrT into helping me make another brown paper tape dummy over the top of the corset so that I have an accurate dummy to work with, my old one is now too fat (yay!). Fingers crossed we might get to that stage tomorrow, otherwise it has to wait another week!

Other than that I need to figure out my order for corsetry supplies and get that going so that it arrives with plenty of time to spare. As far as I can tell it will be cheaper for me to order from the UK and have it shipped- and I’ll be ordering extra boning and such for the wedding dress as well.

Phew- long first post! Hopefully the next few will be shorter. Ha!

Simplicity 1612 – Another Summer Dress

S1612_Planning

I bought two patterns from Simplicity during their last online sale and this is the second pattern from that purchase. The pattern is Simplicity 1612, View A. It’s a knit dress pattern with a twisted front detail at the bust, a twisted back panel, cap sleeves and view A finishes at the knee. I used a retro white/orange/brown printed poly knit that’s been in my stash for yonks. I remember loving it at the time but then I realised the print ran the wrong way (selvedge to selvedge not lengthwise) and it ended up buried in the cupboard. Time to stash bust! 

S1612_FinalDressThe pattern went together easy enough, from cutting to hemming it took me an afternoon, about three and a half hours. I was anticipating some modifications so I didn’t use my nicer fabrics. It was made in a size 26W and for something straight out of the packet it’s turned out well enough to wear around the house BUT you can see my bra at the back so I won’t be wearing it in public. That’s the biggest change I need to make to the paper pattern if/when I make this up again ‘cuz my bra is visible and that’s not a good look! The twist at the bust worked out much better than I thought it would. It covers enough of my chest so that the front of my bra is covered but it’s still a nice steep v-neck. 

On to the list of modifications, none of them are essential but I like to aim for better each time I make something. I will add extra width to the lower inside curve of the back twisty piece and shift the notches on the skirt to match. I will probably cut about 5cm off at the hem to have it sit at or above my knee, it’s a touch too long at the moment (or alternatively I will make it a maxi!). The next time I make it I will shift the shoulder seam back by 1-2cm, I think it sits a bit too far forward. I’m also considering combining the back skirt and back twist panels into one simpler pattern piece for a faster style option. I like the waist shaping through the back so I’d leave the centre back seam. I know that sounds like a long list of changes but they’re all so minor and they will be quick to do. S1612_FSB

I wanted to break this up into a few posts but life has been a bit messy of late so I’m just putting up the finished project.

Simplicity 1800- The Toile

The toile has been made and I am pleased to say this should be much easier to fit than the last pattern I tried- yay!

S1800 FBS Toile

I’m not sure that the 26DD option was the best choice. By measurements it was what I needed but on the body the bust panels were too long and the empire seam sat too low. In the photos I’ve already pinned out approximately 3cm length across the front and back, across the bust area, to lift that seam up and I like where it sits in the photos.
Note: I did a similar alteration to the Francesa top, so I wonder if I just have a higher bust than average for my size.

S1800Toile_NewSideSeamThe side seam wasn’t straight, I need more room across the back hips. There’s enough room around but it’s not balanced and it makes the pockets sit funny. I took a plumb-bob, held it up to my underarm where the sleeve joined and asked MrT to redraw the line on both sides. I’ll add 5cm to the back piece at the side seam, the front can stay as it is.

S1800Toile_ArmholeAlterationLastly, the sleeves were a bit too full at the front. I pinned in a 4cm dart, tapering to the point where the bodice panels join. There is still a bit of ease and I can move but it’s no longer flappin’ about and it makes the shoulder seam sit in a much nicer position.

The instructions for assembly are a bit of a nightmare , especially for the facings but also for the pockets. I loathe facings anyway, so I plan on fully lining the bodice and sleeves in white cotton voile. At least then I can choose from a greater variety of bras without fear of show-through. 😉

I’m happy enough with this toile and the pinned alterations to proceed to the real fabric tomorrow, once I’ve transferred it all to the paper pattern. Wish me luck!

BurdaStyle Francesca Toile #2

I’ve finished the second toile, this time with the sleeves. It’s a big improvement in how it feels when it’s on but I’m still going to change a few more things.

BurdaStyle Francesca Toile V2
The neckline was dropped but I think I can get away with being a bit more chop-happy for the final version. It’s still too high, I think, for the contrast bust panels to look nice.

The band under the bust has been levelled out, I’m happy enough with where it sits now. I think I’ll end up adding elastic between the two princess panels at the back and do away with the zip altogether.

I have wrinkly-pooling-foldiness happening at back waist. Can’t be bothered correcting that the “proper” way so I’m going to combine the back panels into one piece, add another 5-10cm and gather it where it attaches to the band.

The sleeves have a huge amount of ease! The difference between my armhole measurement and my sleeve head is 7cm- yikes. I think I might make a feature of the excess and keep the gathering theme going by making it a bit of a puff sleeve. The circumference at the sleeve hem is also a bit large, so I think I’ll add some elastic between where the ties finish, just to pull it in a bit.

Once it’s made out of a more drapey, floaty fabric I think this will be a winner. I’m quite pleased with how it’s coming along.

Sadly, no fabric shopping for me this weekend *wails!!*. With any luck I’ll get out to the fabric shop on pay-day though.

BurdaStyle Francesca Toile #1

First toile made and pattern modifications have been noted down so I can alter the pattern pieces today and cut a second toile.

Bustrastyle Francesca Toile 01

I need to let it out (more than I thought I’d have to) across the hem, I’ve split it open down the front and back to give me an idea of how much I need to add. I’ll add it evenly throughout the panels. I think a total of 16cm will be enough.

I need to add some length to the front bodice and remove some length on the back bodice- the band under the bust is tilted. Fingers crossed- removing some length on the back bodice and adding some width will be enough to remove, or at least minimize, the wrinkling you can see on the back skirt panels (I’m sure some of the wrinkles you can see is just from bad pinning).

might lower and widen the neckline a small amount. It’s a nice height now without the contrast detailing but if I’m adding more fabric with the contrasting bust panels I can do with enlarging the neckline.

I haven’t added the sleeves to this toile and I’ve left off the contrasting fabric too. I will add the sleeves to the next toile but I think I’ll skip the contrasting fabric again, it’s not needed for tweaking the fit.

I’m going to transfer all the alterations to the pattern pieces today and if I have time cut out the second toile. If all goes well I should be able to sew it up by tomorrow and then go fabric hunting this weekend for the final version. I’ve already seen some gorgeous printed cotton voile online and I’m hoping they have it in store.

As pointed out on The Sewing Forum, I do have wonky shoulders and I know I need to fit for that. Generally I just pin out the excess just before I insert the sleeves but someone made the suggestion of using a small shoulder pad. It’s something I’ll mill over while I make the next toile.

BurdaStyle Francesca Variation

Tsk, tsk, absent blogger, naughty girl not posting for a year. Let’s just pretend I never left and get on to the good stuff.

I saw a post on The Sewing Forum featuring BurdaStyle’s Francesca Variation top and I fell in love with it straight away. It looks to be a great blend of the bohemian spirit and a little bit romantic and sweet which is very much to my taste in fashion. What’s more, it’s available in extended plus sizes- meaning it goes up to a size 60 (euro sizing), rather than stopping at 52/54 like most of their downloads.

Oh- before we go any further- the real push over the fence was that it’s a FREE download. Sure, I still had to print it out and tape it all up, and annoyingly, it’s only available as US letter paper size (hello??!? the rest of the world uses A4!)… but I loved the look of it so much that I did just that.

I spent the evening having a look online for some fabric to make it out of and found a few very nice cotton prints at Lincraft online that look to be about the right scale of print compared to the made up, modelled version on BurdaStyle. I plan on dragging DH out fabric shopping at our local store after I’ve done the toile. Below is my mood board for inspiration, it helps to keep me focussed.

Francesca Mood Board

Speaking of the extended sizing for this pattern- I am pleased to say I can fit in to it! Yay! Going by the completed garment measurements I’ve traced off a 54 bust tapering through to 60 hips. Even if it’s a little bit snug at the start of summer I should get a seasons wear out of it without needing to cut a size smaller.

I’ve sewn up the bodice to check for fit. I will need to take it in along back back centre seam from neck to shoulder blades (rounded back alteration) but other than that it fit’s ok. I still need to attach the waistband, skirt panels and sleeves but I am omitting the bust and skirt insets (contrast fabric) because they’re not needed in the fitting stage. I’ll post pics of the toile once it’s finished. 🙂